CHTC JOVE HEAVY INDUSTRY CO., LTD.

                          Products

                          JOVE

                          MK-24S Crawler-type Drilling Machine

                          MK-24S

                          Product Search:

                          Tel: 0086-731-82398696  82398695
                          Fax: 0086-731-82398697
                          Mail: international@chtcjove.com

                           
                          MK-24S crawler drilling rig is a new generation of pile machinery produced exclusively by Hengtian Jiuwu Heavy Industry Co. , Ltd. . The product not only has the mobility and construction efficiency of the crawler pile frame, but also has the safety and stability of the crawler pile frame and excellent cost performance. It is widely used in all kinds of industrial and civil construction, such as pile foundation engineering, deep foundation pit supporting engineering, anti-seepage Dam engineering in flood control engineering, etc. And can be applied to long screw, diesel hammer, dth hammer and other different construction methods. 
                          ● Easy Transition. Hydraulic telescopic track design, to ensure the working state/self-walking state/road, railway transport state are safe and reliable; 
                          ● simple maintenance, cost-effective;
                           ● stable walking, safe operation. Because the size of the ground is not limited by the chassis, and equipped with the front and rear four hydraulic outrigger, the rollover accident will not occur. 
                           ●The vertical of the column can be adjusted by adjusting the oil cylinder at the bottom of the diagonal brace, and the vertical degree of the pile is high. The vertical degree of the drilling hole is much better than that of the hanging track pile frame with three-point support and two-direction adjustment. 
                           ●There will never be a situation where the treads of the pile frame are often difficult to move because the outriggers are sinking. Construction efficiency can be increased 2-3 times, no pile dead angle.

                          项  目   Item

                          参 数 Parameter

                          适用工作装置

                          Apllialbe working device

                          液压打桩锤 Hydraulic piling hammer

                          5T 以下 Below

                          柴油锤 Diesel hammer

                          HD62 以下 Below

                          振动锤(电动/液压)Vibra hammer

                          电Electro 90 KW /

                          液Hydraulic 80 T

                          主卷扬 Main winch

                          额定提升力 Rated lifting force (KN)

                          > 60 (Ø22钢丝绳

                          Wire rope)

                          最大绳速 The maximum rope speed (m/min)

                          > 60

                          有效容绳量 Effective capacity of rope (m)

                          > 90

                          副卷扬 Auxiliary winch

                          额定提升力 Rated lifting force (KN)

                          > 60 (F400桩 Pile)

                          最大绳速 The maximum rope speed (m/min)

                          > 40

                          有效容绳量 Effective capacity of rope (m)

                          > 70

                          整机总功率 Total power (KW)

                          112

                          桩架 Pile frame

                          立柱最大工作高度

                          Maximum working height of column (m)

                          22.7

                          适用桩长 Applicable pile length (m)

                          14

                          导轨直径 Guide diameter (mm)

                          102

                          轨距 Track gauge (mm)

                          600

                          扶梯 Escalator

                          单侧扶梯 One side

                          运输状态 Transport status

                          可折叠 Collapsible

                          立柱截面 Column cross section

                          矩形 Rectangle

                          立柱前倾 Column bend forward ()

                          3

                          立柱侧倾 Column bend side ()

                          3

                          底盘 chassis JV215

                          履带板宽 Track width (mm)

                          700

                          节距 Pitch (mm)

                          190

                          接地线长 Ground wire length (mm)

                          3558

                          整机接地比压 Ground pressure (KPa)

                          98

                          整机外形尺寸

                          Overall dimension

                          运输状态 Transportation status (L×W×H)(mm)

                          17550×3190×3390

                          工作状态 Working status (L×W×H)(mm)

                          6678×3190×21500

                          Copyright © 2008-2010 CHTC JOVE Heavy Industry Company All Right Reserved [湘ICP备12003251号]
                          捷瑞数字 制作维护
                          10bet移动端手机_10bet移动客户端_10bet十博最佳体育平台